Category Archives: Turbine

Why An Authorized MRO Is The Right MRO To Turn To

Why An Authorized MRO Is The Right MRO To Turn ToKeeping an aircraft in the air is a big job, and it goes far beyond just the pilot in the cockpit. Just like any other machine, an aircraft requires a lot of care, maintenance, and occasionally a repair job in order to keep it ready to fly. While most fleets will have some of their own maintenance technicians on hand, at some point you’ll have to consider the use of an MRO to help you.

There are plenty of different reasons that you’ll need to trust an MRO – from jobs that are too large for your team to the simple fact that you have too much work to handle at once. However, knowing when the time is right for an MRO’s assistance isn’t usually as difficult as knowing which one to turn to. Continue reading Why An Authorized MRO Is The Right MRO To Turn To

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS

Understanding How A Turbine Engine Works

Understanding How A Turbine Engine WorksWhile plenty of smaller aircraft today are still equipped with the reliable radial engines, it’s turbine engines that have really changed the aircraft industry over the last few decades. These engines have become the standard for most aviation machines, and taking a few minutes to understand more about how they work is always a good idea if you own an aircraft equipped with one. Continue reading Understanding How A Turbine Engine Works

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS

PT6 Celebrates Fifty Years Part 1

When it was developed in 1963, the PT6 was the first turboprop engine rated at 450 shaft horsepower, impressing Beechcraft to the point that the company chose to install the engine in their King Air line of turboprop twins.  Fast-forward 50 years, and Beechcraft still choose the PT6, although of ever-increasing power ratings, to power their engines.

 Before The PT6

beechcraftPratt & Whitney began development of the PT6 in the late 1950’s in an attempt to replace the manufacturer’s Wasp radial engines, developed during in the 1930’s.  In 1925, Frederick Rentschler, President of Wright Aeronautical, approached his brother, Gordon, and Edward Deeds, who were both on the board of Niles Bement Pond, convincing them that Pratt & Whitney Machine Tool, a subsidiary of Niles, should fund the creation of a new aircraft engine Rentschler and a colleage, George Mead, were developing.  The engine was to be a large, air-cooled radial design.  The executives at Pratt & Whitney saw an opportunity for growth and lent Rentschler $250,000, the use of the Pratt & Whitney name and space in their building to begin creating the new engine.  Rentschler left Wright Aeronautical and took over operations of Pratt & Whitney Aircraft Division, The first of the Wasp series debuted on December 24, 1925, quickly becoming one of the most widely used aircraft engines in the industry due to their superior speed, rate of climb and reliability.  Charles Lindbergh and Ameila Earhart both set records in Wasp-powered aircraft.

Wasp to Hornet

 With the development of the PT6 still a few decades away, Pratt & Whitney created the next line of radial engines, the Hornet, rated at 525 horsepower.  The dependability of both the Wasp and the Hornet made them very popular among commercial aircraft, and as the public use of air travel increased, so did the demand for Pratt & Whitney engines.  As it became apparent that the United States would enter World War II, President Franklin D. Roosevelt called on manufacturers to produce 50,000 aircraft a year for military use, requiring Pratt & Whitney to expand its workforce from 3,000 to 40,000.  Throughout the war, Pratt & Whitney continued to innovate, until, by the end of the war, their largest engine provided 3,600 horsepower.  However, radial engines were slowly being replaced by lighter turboprop engines.

Vision of the PT6

In 1957, Pratt & Whitney saw an opportunity to channel profits from the piston engine spare parts business to the development of smaller gas turbine engines than those currently being manufactured in the United States. The company gathered a team of 12 young engineers after conducting market studies that found there was a need for a 500 shaft horsepower engine that could replace piston engines, such as the Wasp and Hornet.  In December 1963, Pratt & Whitney shipped the first of the PT6 series, the PT6A-6, a highly innovative gas turbine representing technology advances that were significant at the time.  Because gas turbines have a higher power to weight ratio than piston engines, the PT6 was perfect for aviation engines.

pt6aThe PT6 has enjoyed a rich and colorful history since it began production in 1963, and Pratt & Whitney is proud to celebrate the 50th anniversary of this timeless aircraft engine.  Learn more about the colorful past, pioneers who flew this engine and continuing evolution of an engine ahead of its time.  For more information on the PT6 or about aircraft maintenance, contact Covington Aircraft online or by telephone today.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS

Refresher Lesson: The Difference Between Radial and Turbine Engines

Turbine engines, also commonly known as jet engines, are different than radial engines. Some pilots who fly smaller aircraft find that radial engines are more fun to fly, while pilots of jet engine aircraft find the extra steps involved in flying a radial engine too difficult.

Turbine Engines

Turbine enginesTurbine engines operate similar to a steam power plant, except they use air instead of water. Air flows through a compressor, creating higher pressure, and fuel is sprayed into that air so that it ignites and creates energy. The gas created enters a turbine, expanding and producing shaft work output. The turbine shaft then works to drive the compressor and generator, and energy not used in the process is expelled as exhaust fumes.

Radial Engines

Radial engines, also referred to as “round engines” by pilots, resemble a star when viewed from the front, as cylinders point outward from a central crankshaft. Radial engines were common in aircraft before the development of turbine engines, and many pilots still prefer flying radial engine airplanes. In a radial engine, pistons are connected to the crankshaft using a rod assembly. One piston has a master rod with a direct attachment to the crankshaft. Normally, radial engines have an every-other-piston firing action that makes the motion more uniform.

Main Differences

Radial engines often have a large frontal area, which sometimes made planes—especially those used in battle—less aerodynamic. Turbine engines also fly at higher rates of speed than aircraft powered by rotary engines, but are often less fuel efficient and much louder than rotary engines. Many pilots claim that rotary engines are more challenging to fly, as the steps for take-offs, in flight and landings are much more complicated than turbine engines.

For more information on aircraft care and maintenance, connect with us on Facebook, Twitter and at Covington Aircraft.com!

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS